 |
 |
 |
|
Model 1224 Power Threading Machines - 0.5 in. - 4 in.
-
Shown on optional No. 200A stand
-
Motor Control: Reverse/off/forward, heavy-duty rotary-type and integral foot switch
-
Gear Box: Two-speed gear box 3:1 ratio
-
Chuck: Hammer-type with replaceable rocker-action jaw inserts
-
Oiling: Through-die head
-
Pump: Self-priming, GEROTO-type, automatic-reversing, constant-flow
Specifications:-
Voltage : 120.00 V
-
Frequency : 60.0 Hz
-
Speed : 36 rpm, 12 rpm
-
Pipe Cap. : 1/2 in (NPT) [Min], 4 in (NPT) [Max]
-
Power Cap. : 1 1/2 hp [Max]
-
Phase : Single
Includes : 1-No. 714 (914) 2 1/2 - 4 in. Receding Self-Opening Die Head, 1-No. 711 (911) 1/4 - 2 in. Universal Self-Opening Die Head, 1-Set 1/2 - 3/4 in. Universal Alloy Dies, 1-Set 1 - 2 in. Universal Alloy Dies, 1-Set 2 1/2 - 4 in. 1224 High Speed Dies, 1-Gallon Nu-Clear Oil, 3-Hex Keys, 1-spare F-229 Cutter Wheel, 1-3/4 in. Combination Wrench, 1-Tool Box, 1-No. 744 Reamer, 1-No. 764 Cutter
-
Wt. : 509 lb
-
UNSPSC : 27112834
|
|
|
|
|
|
 |
|
 |
|
Product Features
- Threads 1/4 in.-2 in. pipe at 36 RPM and 2 1/2 in.-4 in. at 12 RPM.
- The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.
- An induction motor insures sound levels well within the limits set by the regulating authorities.
- A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
- 1/4 in.-2 in. Universal Die Head; 2 1/2 in.-4 in. receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.
- Constant and proper lubrication of dies and workpiece with through-head oiling.
- CSA approved.
- Approved to UL standards (NRTLC).
|
|
|
 |
|
 |
|
BRICK'S KILLER DEALS 
