 |
Scotchgard Heavy Duty Stain Remover
Powerful cleaner removes difficult stains. Comes with a regular tip for surface stains and a 5 inch extension tube for reaching into carpet pile for deep stains. Aerosol, 12 cans per case. 3M Id : 70-0711-6296-3. GTIN(UPC/EAN) : 5 00 48011 14004 4
Scotchgard Heavy Duty Stain Remover is a ready-to-use aerosol product formulated to remove the toughest stains from carpet. The aerosol includes a regular spray tip for surface applications, and an extension tube spray tip for applications deeper into the carpet fibers. This stain remover is not formulated for daily use. The Heavy Duty Carpet Stain Remover should be used on stains that are not successfully removed using a daily spotter.
Special Features:
Aerosol delivers a thick white foam which minimizes the overuse of chemicals and moisture on the carpet
Formulated to effectively remove tough stains from tar, grease and oily materials
The extension tube spray tip allows the foam to be delivered deep in the pile so
the foam can lift the stain out of the carpet
Applications:
Most commercial and residential carpet styles and fiber types
General Use Directions:
Note: Test the cleaner in an inconspicuous area to assure the carpet is colorfast. Apply ready-to-use solution to a small area. After several minutes blot the carpet with a clean white cloth or paper towel. If color from the carpet transfers to the cloth or towel, discontinue use.
1. Loosen any solid material using a dull spatula, spoon, or butter knife by scrapping toward the center of the spot.
2. Vacuum away the dried material before applying spot remover.
3. Shake the can well.
4. Select the appropriate spray tip and line up the arrow on the tip with the dot on the can rim.
Large surface stains – use the regular spray tip.
1. Apply a layer of foam to the stained area.
2. Gently agitate the stained area with a dull tool and allow time for the product to penetrate the fiber.
3. Blot the area with a clean, white cloth or paper towel.
4. Spray the area with clean tap water and agitate again.
5. Blot the area with a clean white cloth or paper towel.
6. If the stain is not completely removed, repeat steps 1-5 above.
Small stains– use the extension tube tip.
1. Carefully apply the foam into the base of the carpet fiber.
2. Allow the stain remover to penetrate the fiber and lift the staining material out of the carpet.
3. Use a flat tool to scrape the foam from the surface of the carpet to avoid forcing the stain back into the carpet.
4. Blot the area with a clean, white cloth or paper towel.
5. Spray the area with clean tap water and agitate again.
6. Blot the area with a clean white cloth or paper towel.
7. If the stain is not completely removed, repeat steps 1-6 above.
Note: To avoid re-soiling it is critical to rinse the area with clean tap water after cleaning.
Product Specifications:
(Typical Values)
1. pH: Approximately 10
2. Flashpoint:
Propellant -127° F
Liquid > 190° F
3. Solubility in water: Complete
4. Specific gravity: 1.0
5. Appearance: Clear
6. Fragrance: Mild odor |
|
|
BRICK'S KILLER DEALS 
