 |
For use with ultra high speed machines (1500-3000 RPM) on harder finishes or in high traffic areas. Produces brilliant wet-look in gloss. Designed for exceptional durability, life and best mark removal. GTIN(UPC/EAN) : 5 00 48011 05607 9
3M Id : 61-5000-4535-8
This product is a floor maintenance buffing pad for use on ultra high speed floor machines that operate at 1500-3000 rpm. The product is made of polyester fiber in a non-woven web having resins throughout and bonded to the web structure. The pad is nominally one inch thick and available in various sizes.
Intended Use
The pad is used with ultra high speed equipment operating at 1500-3000 rpm. These machines can be cord electric, battery electric, or propane powered. The pad is used for buffing or limited spray cleaning.
Standard Sizes
Circular discs and other shapes are available in a variety of common sizes.
Color
Tan
Requirements:
General Requirements:
This product shall be made of polyester fibers and synthetic adhesives and shall not be significantly affected by water, detergents, and cleaners normally used for floor maintenance. The product shall be reversible and nominally one inch thick.
Pad Use and Cleaning
Directions for Use:
Dust, mop, damp mop, or auto scrub floor as necessary to remove soil prior to buffing or spray cleaning. Dust mop after spray cleaning to remove residue.
Pad Cleaning:
Pads may be hosed out using a pressure spray nozzle to remove soil. Pads may be soaked in detergent or diluted stripping solution to dissolve caked-on soil or finish prior to cleaning. |
|
|
BRICK'S KILLER DEALS 
